TLCT/WTLCT Series

Chemfluor® FEP Fluoropolymer Smooth Inner Tube - EPDM Rubber Cover

Smooth Chemfluor® FEP fluoropolymer tube internally bonded to an EPDM rubber hose type construction. Multiple polyester plycord and EPDM rubber reinforcement. Double helix, high tensile strength carbon steel wire support. Chemically resistant, ozone and abrasion resistant cover of EPDM rubber.

Available with green or white covers standard. Color coded TLCT covers can identify specific process lines or be department traced. Special colors available with minimum order quantities per size.

FEATURES AND BENEFITS

  • Unexcelled chemical resistance
  • Full vacuum rated
  • Durable, kink resistant, with no external wire reinforcement to potentially fray
  • Easy to clean non-stick smooth tube for assured sterility
  • Can be cleaned with steam, caustics, solvents or other cleaning agents
  • Resistant to chemicals, ozone and abrasion
  • Temperature Range From -112°F (-80°C) to 320°F (160°C)

 

PRODUCT DETAILS

Part Number ID Inches (mm) OD Inches MM Max Working Pressure (PSI @ 70F) Min Burst Pressure 70 Vacuum Rating Bend Radius (inch) Weight per Ft (lb)
 
08TLCT 1/2 (12.7) 7/8 (23.1) 500 2100 29.9 2.50 0.35
12TLCT 3/4 (19.1) 1-1/4 (31.8) 500 2100 29.9 3.25 0.62
16TLCT 1 (25.4) 1-1/2 (38.1 450 1800 29.9 4.75 0.75
20TLCT 1-1/4 (31.8) 1-3/4 (44.5) 320 1600 29.9 7.00 0.98
24TLCT 1-1/2 (38.1) 2 (52.1) 300 1350 29.9 9.00 1.20
32TLCT 2 (50.8) 2-5/8 (67.3) 250 1200 29.9 11.50 1.50
40TLCT 2-1/2 (63.5) 3-1/4 (81.3) 200 900 29.9 18.00 2.35
48TLCT 3 (76.2) 3-3/4 (94.0) 150 700 25.0 22.00 2.50
64TLCT 4 (101.6) 4-3/4 (119.4) 150 600 10.0 34.00 3.60
 

For white cover, substitue WTLCT for TLCT.

Burst pressure ratings at ambient 70°F (21°C). See applicable notes below on vacuum/pressure ratings @temperatures other than ambient.

Weights & outside diameter information is nominal.

Working Pressure is given @ 70°F. Decrease working pressure 1% for every 2°F above 212°F.

Vacuum Rating is given @ 70°F. Decrease vacuum rating 1% for every 2° above 212°F. For 1 1/4 and larger sizes vacuum rating decreases when installed less than 2x minimum bend radius.

Flare-Thru fittings are pressure rated only! Not for vacuum service.

Extended Service Life Tip: Flexible Components suggests using full length anti-kink casing or at least 16 to 24 long anti-kink cuffs at each fitting end to help reduce the strain on the crimp collar and fitting in high load installations. Extended service at elevated temperatures will reduce total service life.

Integra is proud to be a distributor of St. Gobain products.